Getting specifications, connection paths, and resources ready.
Model: D215P-1RW · white
Indoor 120 V Wi-Fi plug-in switch for lamps and supported small appliances. Rated 15 A general use, 5 A LED/CFL and 1500 W incandescent/halogen. Matter may require a firmware update through My Leviton and a compatible Matter controller; the native My Leviton Wi-Fi connection does not require a separate Leviton hub.
Catalog-level details. Controllers, bridges, accounts, and available features depend on the connection route.
Confirm the exact variant before choosing. Store prices and availability can change; product-information pages are not store offers.
Indoor use only
Read the limitationsWhat to know about this device before choosing a connection.
Recorded catalog fit tags; check the route requirements before treating this as a match.
Retail consumer packaging SKU. Rated 15A general use, 5A LED/CFL/electronic ballast, 1500W incandescent/halogen, 15A magnetic ballast, and 3/4 HP motor. Plug-in smart switch, no hub required, Wi-Fi and Matter certified, two-year limited warranty. Reviewed manufacturer clarification (2026-10-18): 120 V AC, 60 Hz; indoor use in a non-switched receptacle. The 1500 W rating is for incandescent/halogen loads, not a universal appliance rating. The manufacturer prohibits using this device to control high-power heating appliances. Matter setup uses a compatible Matter controller and may first require a firmware update in My Leviton; the no-hub claim applies to the native Wi-Fi/app path. No new Home Assistant integration or hardware test is claimed.
A catalog update is not a new verification. Regional and firmware scope are recorded separately for each route.
Check your ecosystem, then choose a connection method for its requirements and available controls.
A listed ecosystem is a starting point. Connection methods and exposed capabilities must be checked for the exact variant.
Reviewed guide
A documented connection is available. Check its equipment, account, firmware and feature requirements.
Home Assistant via Matter Wi-Fi: Matter-enabled firmware only (documentation reviewed)No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
No verified evidence yet
Compatibility has not been established for this exact model. This does not mean it is incompatible.
Missing documentation does not mean a device is incompatible. Reviewed documentation is not a physical hardware test.
Basic controls on the reviewed connection. Setup, remote access, voice services and firmware updates have separate requirements.
D215P-1RW · US · Documentation reviewed. Check the unit’s hardware and firmware before setup.
Documented controls may have firmware or configuration conditions. Read the guide before relying on a feature.
Open setup guideInstallation & device requirements · Manuals & resources · All connection details
Choose a documented method. Requirements, controls, local/cloud behavior, and evidence stay attached to that route.
Home Assistant · US · D215P-1RW
Documentation reviewed · 10/18/2026. Not tested on physical hardware.
Leviton D215P-1RW (Matter enabled)
Compare the documented support source and effort for each route. Official/community support and local/cloud operation are separate questions.
Uses the built-in Matter integration, subject to documented commissioning limitations.
Check status & evidenceRequires a prepared Matter Server, supported phone and compatible LAN.
Check status & evidenceChoose a connection method for its app, account and controller requirements. An app used by one method is not necessarily required for every connection.
Controllers for the reviewed connections are listed below. These requirements do not apply automatically to other setup methods.
Hubs listed in the catalog:
Setup and software downloads have separate requirements from everyday local control. A completely offline setup has not been established by these summaries.
Requirements apply to this setup method.
Commission with the supported Companion app and phone Bluetooth; finish any separate firmware preparation beforehand.
Check evidenceUse current Home Assistant OS on a supported 64-bit host.
Check evidenceInstall the Matter integration and official Matter Server app; Home Assistant supplies the Matter controller.
Check evidenceFor this already Matter-enabled direct-commissioning path, the manual permits Matter without My Leviton. A My Leviton account/app is needed for its separate documented legacy-upgrade path or chosen vendor-cloud setup.
Check evidenceThis is Wi-Fi Matter; no Thread border router is required.
Check evidenceExpand a group to see all recorded attributes. Electrical maxima depend on load type; check operating and installation limits in the exact model documentation. Route-specific feature availability can differ. Missing fields are not a confirmed “No.”
Readings available to your smart-home system depend on the connection. Check readings by connection
Check the model, region, hardware revision, and document version. Connection-specific sources are linked in each guide.
Reviewed documentation, catalog records, and manufacturer observations have different scopes. A source for one capability does not establish every feature.
Connection guides preserve source dates, publishers, review status, and claim-level links. “Documentation reviewed” does not mean tested on physical hardware.
Documentation reviewed Oct 18, 2026 · D215P-1RW · US
Other active devices in this category. Their connection requirements and capabilities may differ.
10EBO901 · Smart Plugs
The premium Apple Home plug. Thread-native, zero cloud, real-time energy monitoring, full local control. No hub needed if you have a Thread border router (HomePod mini, Apple TV 4K). The best plug for Apple Home users.
Recorded scores: Overall 8.7/10 · Value 7.4/10
Explore connectionsWi-Fi / IPv6 LAN
To Matter Server
Matter Server
To Home Assistant
Home Assistant
Complete the required items before setup. Items marked “Not required” are optional for this route.
Documented
Use only the exact US D215P-1RW with Matter-enabled firmware already installed and a valid Matter setup code. A legacy HomeKit QR code is not the Matter code.
Documented
This guide begins after Matter has been enabled on the actual unit. It does not cover firmware conversion or assume a retail unit is Matter-ready. If Matter readiness or the code cannot be confirmed, stop and follow current manufacturer guidance.
Derived from documentation
Use 2.4 GHz Wi-Fi on the Home Assistant LAN/VLAN with working IPv6 and mDNS multicast. Internet IPv6 is unnecessary.
Documented
Use current Home Assistant OS on a supported 64-bit host.
Documented
Install the Matter integration and official Matter Server app; Home Assistant supplies the Matter controller.
Derived from documentation
For this already Matter-enabled direct-commissioning path, the manual permits Matter without My Leviton. A My Leviton account/app is needed for its separate documented legacy-upgrade path or chosen vendor-cloud setup.
Not required
This is Wi-Fi Matter; no Thread border router is required.
Documented
Use a currently supported Android/iOS Companion app with Bluetooth enabled, near the plug. Follow current app permission requirements.
Documented
Follow each load-specific rating in the manual; general-use current is 15 A at 120 VAC. Do not use for high-power heating appliances, including portable heaters. Use a non-switched receptacle and observe all manual restrictions.
Derived from documentation
Confirm model D215P-1RW, Matter-enabled firmware and the Matter commissioning code before proceeding. Do not update or reset a working installation merely to follow this route.
Documented
Add Matter under Settings > Devices & services and install its official server app.
Documented
Connect to a non-switched 120 VAC receptacle. For setup mode, hold the control button seven seconds, release when amber, and confirm green blinking. Do not continue holding to the factory-reset threshold.
Derived from documentation
In the Companion app Matter setup, choose new and scan the Matter code. If already commissioned, use its current controller to generate a fresh sharing code instead of reusing the original code.
Derived from documentation
After commissioning, test on/off using a compatible, safe lamp before relying on control or automations. Confirm actual exposed controls; do not assume entity names or optional features.
Derived from documentation
Inferred from Leviton's documented on/off and direct Matter setup plus Home Assistant's Matter controller documentation. This is not an exact-model hardware test; verify operation after commissioning.
Not yet verified
No exact-model Matter/Home Assistant metering exposure was established. Rated watts or broad app energy features are not evidence of readings.
Not yet verified
No exact-model Matter/Home Assistant metering exposure was established. Rated watts or broad app energy features are not evidence of readings.
Derived from documentation
Commission with the supported Companion app and phone Bluetooth; finish any separate firmware preparation beforehand.
Documented
Matter control uses the local network, without vendor-cloud dependence.
Not yet verified
Remote access is outside this local-control guide and has not been verified for the installation.
Not yet verified
Automation behavior and its dependencies have not been verified for this exact installation.
Not yet verified
The current update path, latest Matter firmware and update availability through Home Assistant are unverified. The separate legacy-conversion warning is not an ongoing update guarantee.
Not yet verified
No actual hardware revision, shipping firmware, current firmware or exact-model tested version was established. This route is conditional on Matter already being enabled.
Documented
separate_manufacturer_workflow
Older firmware may need the separate My Leviton account/app upgrade path. Leviton warns that installing Matter firmware removes the previous native HomeKit connection. No current enrollment procedure or latest firmware version is asserted here.
Not yet verified
Neither exact model nor its base model is named in the official known-working list. Native decora_wifi compatibility is unverified and not offered as a verified fallback.
Not yet verified
Entity domains, identifiers, additional controls and state behavior have not been established by an exact-model official test.
Documented
US
Exact-SKU US manufacturer product page and its linked 120 VAC product documentation.
Documented
Uses the built-in Matter integration, subject to documented commissioning limitations.
Derived from documentation
Requires a prepared Matter Server, supported phone and compatible LAN.
Leviton · manufacturer · Checked 2026-10-18
Exact retail SKU, 2.4 GHz Wi-Fi, product control functions, and conditional Matter support. Does not establish shipping firmware or exact Home Assistant entities.
Source location: Exact SKU heading; installation and Matter bullets; Features & Benefits; linked Matter Getting Started Guide
Leviton · manufacturer · Checked 2026-10-18
Matter-enabled base-model manual linked by the exact SKU page. Direct Matter setup or My Leviton or both; setup mode, controller requirement, multi-admin code handling and safety. Not proof that every retail unit already has Matter firmware.
Source location: DI-000-D215P-02B (2023); printed panels 3, 5-8, 11, 13, 15-16
Leviton · manufacturer · Checked 2026-10-18
Product on/off capability. Load ratings and vendor features do not establish metering or Home Assistant entity exposure.
Source location: REV JUN 2023; Application, Features and Benefits, Ratings, Network
Home Assistant · platform · Checked 2026-10-18
Official general Matter setup and local-control requirements; not an exact Leviton model test.
Source location: Matter controller/server; Supported installation types; Adding a Matter device; Sharing a device; General recommendations
Home Assistant · platform · Checked 2026-10-18
The native cloud integration lists other known-working models; neither D215P nor D215P-1RW appears. Exact-model native compatibility is unverified.
Source location: Supported devices; Configuration; Cloud Polling classification
Leviton · manufacturer · Checked 2026-10-18
Older-firmware upgrade is a separate My Leviton account/app workflow. Installing Matter firmware removes the prior HomeKit connection. Historical workflow text is not treated as a current enrollment requirement or latest-version statement.
Source location: Opening model list and account/enrollment assumptions; HomeKit migration warning; Matter code retrieval
Leviton · manufacturer · Checked 2026-10-18
Names D215P and D23LP as firmware-upgradable; documents My Leviton account use for upgrade and the old HomeKit migration consequence.
Source location: How will Matter be supported; How do I upgrade my devices and what should I expect
KP125M · Smart Plugs
Kasa Wi-Fi smart plug with manufacturer-documented Matter and Kasa-app energy monitoring; this reviewed guide covers the local TP-Link integration.
Recorded scores: Overall 8.6/10 · Value 9.4/10
Explore connectionsKasa / TP-Link US (official product information)
PLUGSPLUS · Smart Plugs
The best smart plug for Home Assistant users. Full local control via HTTP/MQTT/WebSockets, real-time energy monitoring, no cloud account needed. Can be scripted directly on the device. The HA enthusiast's plug.
Recorded scores: Overall 8.6/10 · Value 9.1/10
Explore connectionsKP115 · Smart Plugs
Reviewed guides: Home Assistant →
Kasa Wi-Fi plug with energy monitoring in the Kasa app; US electrical ratings are documented separately from other regions.
Recorded scores: Overall 8.3/10 · Value 9.7/10
Explore connectionsKasa / TP-Link US (official product information)
P110M · Smart Plugs
Reviewed guides: Google Home, Home Assistant →
A Tapo Matter-over-Wi-Fi plug with documented energy monitoring. Connection requirements and exposed readings depend on the selected ecosystem, hardware and firmware.
Recorded scores: Overall 8.2/10 · Value 9.2/10
Explore connections
